| GE port | - 4 x SFP connectors
- 1000BASE-X SFP,
- 1000BASE-T SFP,
- 10/100/1000BASE-T SFP
|
| Clock interface | - SYNC-RX: CC3 male connector
- SYNC-TX: CC3 male connector
|
| Debug interface | 1 x mini USB |
| Dimensions | 240 (H), 25 (W), 225 (D) mm |
| Operating temperature | - 5 to 50⁰C |
| Storage temperature | -25 to 60⁰C |
| Humidity | 10 to 90%, non-condensing |
| Max power consumption | 30 W |
|
| MPLS | - Support static MPLS, follow the MPLS-TP standard
- LSP, tunnel, PWE3 and VPLS 4 types MPLS service
- ITU-T G.8131 MPLS link protection switching
- MPLS-TP LSP/PW/section OAM function
- Support static VPLS as E-Line or E-Lan or E-Tree
- based on port or port + VLAN
|
| Synchronization | - ITU-T G.8262 Synchronous Ethernet
- Clock in/out interface: 2 x CC3
- E1 mode (75 Ohm): 2Mhz or 2M BITS
- Support IEEE 1588 V2 PTP clock with TSU card
- Support OC, BC clock modules and E2E/P2P delay mode
|
| Ethernet | - MTU: 13k byte
- Up to 32k MAC
- Support 4,094VLANs (C-tag), stacked VLANs (QinQ,
- S-tag), VLAN mapping and inner/outer VLAN
- translation
- Support VLAN AC isolation
- Support STP, RSTP and MSTP
- L2/L3 loopback on port
- Interface protection, port monitoring
- Layer 2 protocol transparent
- Mirror based on ingress or egress or ACL
|
| Traffic Management | - Service classification based on
- port/VLAN/MAC/TDM CES port-based/IP
- TOS/DSCP/TCP/UDP/MPLS-TP
- Support SP, WRR and SP + WRR scheduling modes,
- and up to 8 queues per port
- MEF-compliant 3-color policing with color-aware and color-blind mode
- Bandwidth throttling per port/VLAN/CoS (DSCP)
- Support hierarchical bandwidth profile in the
- ingress direction
- Traffic shaping on egress per queue
|
| Security | - Secure MAC address
- ACL based on VLAN, CoS, MAC, EtherType, IPv4,
- IPv6, or user-define combinations
- Storm control (broadcast, multicast, DLF)
|
| Reliability | - Link aggregation group (LAG) - up to 8 groups with
- 8 ports in each group, and six load balancing
- modes based on source/destination IP and/or
- MAC
- Card redundant protection and port protection
- ITU-T G.8031 Ethernet link protection switching
- (ELPS) and G.8032 Ethernet ring protection
- switching (ERPS) with the automatic protection
- switchover time less than 50ms
- ITU-T G.8131 MPLS link protection switching and
- the switching time less than 50ms, up to 32 1 + 1 or
- 1: 1 protection groups
- Port/VLAN-based Ethernet local loop detection
|
| OAM | - IEEE 802.3ah EFM-OAM link management
- IEEE 802.1ag connectivity fault management (CFM)
- with 3.3ms CCM resolution
- ITU-T G.8113.1 MPLS-TP LSP/PW/section OAM
- ITU-T Y.1731 performance monitoring (PM)
- Hardware-based SLA KPIs per port or EVC and
- MPLS-TP, which include throughput, delay, jitter and packet loss
- Dying gasp message
|
| System Management | - Remote management via SNMP v1/v2, Telnet and SSHv2
- Local management via console interface
- MEF 36 compliant MIB
- RMON, LLDP, Syslog
- Port/VLAN/EVC/Cos-based statistics
- Alarm management
- SFP digital diagnostic management (DDM)
- FAN monitoring
- Voltage and temperature monitoring
|
| Standard Compliance | - IEEE802.1Q (VLAN), 802.1ad (QinQ), 802.1ag
- (CFM), 1588 v2 PTP, 802.1D (STP), 802.1w (RSTP),
- 802.1s (MSTP), 802.1p (QoS/CoS Priority), 802.1x
- (Security), 802.3ad (LAG), 802.3ah (EFM)
- ITU-T G.8262 (SyncE), G.8031 (ELPS), G.8032
- (ERPS), G.8131 (MPLS LPS), G.8113.1 (MPLS OAM),
- Y.1731
- IETF RFC 2819 (RMON)
- MEF 6, 9, 10, 14, 36 (CE2.0-compliant)
- Safety CE certified
- EMI Class A
|
