iTN2100 - нове покоління платформи PTN (Packet Transport Network) для передачі трафіка Ethernet і TDM. З лінійної сторони пристрій підтримує до 4 інтерфейсів 10 Gigabit Ethernet або 8 інтерфейсів Gigabit Ethernet і 4 інтерфейси STM-16/4/1, різноманітні трибутарні інтерфейси на клієнтській стороні, реалізує функції EoTDM і TDM pseudo wire. Таким чином, iTN2100 може використовуватися в мережах різного масштабу і призначення як мультисервісне рішення доступу.

Розширені можливості, засновані на функціональних модулях EoTDM/PWE3, гарантують гнучку обробку як Ethernet-трафіка поверх TDM, так і TDM-трафіка поверх Ethernet/MPLS-TP мереж. Безпека, надійність і відмовостійкість досягаються двома типами висхідних підключень 10G/GE і STM-16/4/1, а також підтримкою ITU-T G.8032/8031. Повне резервування апаратного забезпечення гарантує максимальну тривалість безперервної роботи обладнання.

Основні особливості:

  • Одночасна підтримка IP і TDM: висхідні з'єднання 10G, GE, STM16, STM4, STM1
  • Підтримка безлічі сервісів: STM1, FiberMUX, DS3, E3, E1, FE, FX, V.35, V.24, G.SHDSL.bis
  • Синхронізація через мережу Ethernet операторського класу: ITU-T G.8262 (SyncE), IEEE 1588-2008 (PTP)
  • Підтримка static MPLS (як PE-пристрій)
  • Управління: Telnet, CLI, SNMP

Схема застосування:

Мультисервісна платформа PTN Raisecom iTN2100

Докладніше
Виробник Raisecom
Write Your Own Review
Ви переглядаєте:Мультисервісна платформа PTN Raisecom iTN2100
Ваша Оцінка
Features
Slot distributionTotally 15 slots, 1 for NMS module, 2 for power module,
2 for 10G/GE uplink module and 2 for SDH uplink module, 8 or 10 for tributary module
Capacity
  • Totally 4 × 10G or 8xGE and 4 STM16 */4/1 SDH uplink ports
  • Totally 128xGE/80xFX/40xSTM1/30xDS3 or E3 electrical or optical
  • /320xE1 electrical/40xFiberMux/80 Ethernet interfaces at tributary links
  • 8 VC4 at each aggregation slot
  • 1 VC4 and 2 GE at each tributary slot, while 4 VC4 at the 2nd & 4th slots
IP features
  • Support Link Aggregation function
  • 4K 802.1q VLAN and Q-in-Q (double tag)
  • Transparent forwarding of BPDU, LACP and IEEE802.1x frames
  • QoS support SP, WRR, SP + WR
  • Support OAM 802.3ah, 802.3ag *
  • Support broadcast storm control
  • Support GE Ethernet ring
  • Access control lists (ACLs)
Cross connection
  • Four levels cross connection granularity: 64K, VC12, VC3, VC4
  • 20 × 20 VC4 (STM1 card) or 32 × 32 VC4 (STM4 card) cross connection
  • capacity
  • 48 × 48 E1 cross connection capacity at 64kbps function via DXC card
  • VC12 cross connection between all tributary units
    and aggregation unit and the cross connection direction
    support bidirectional, unidirectional broadcast and loopback
Protection
  • Redundant protection of switch & SDH aggregation cards
  • Redundant protection of EoTDM cards
  • Redundant protection of PWE3 cards
  • Redundant protection of multiservice FiberMux cards
  • Redundant AC and DC power supplies
  • G.8131 MPLS-TP Liner and wrapping & steering MPLS-TP ring protection
  • ITU-T G.8032/G.8031 Ethernet ring/line protection
  • 1 + 1 MSP and 1 + 1 LPP and SNCP protection at aggregation slots
  • 1 + 1 MSP protection at 2nd and 4th tributary slots
  • The protection switching time is less than 50 ms
  • Support auto \ force \ manual switching and lock mode
  • Support revertive and nonrevertive protection switch mode
  • The protection switch revertive time is configurable
Ethernet Clock
  • Support Synchronous Ethernet (SYNC-E)
  • Support IEEE 1588-2008 BC and TC mode *
  • Support 2Mbit/2MHz external clock on switch card
SDH Clock
  • STM4/1 optical port line clock
  • 2Mbit/2MHz external clock within clock sub-card
  • Support SSM protocol
Management features
  • Telnet/CLI/SNMP (v1/v2/v3)
  • In-band and out-of-band network management channel
  • In-band network management channel support Ethernet ring function
  • Support Ethernet bridge
  • Support RIP protocol
  • Support NAT and NAPT
  • Support pre-configuration of service
  • End to end management
  • Discover the topology automatically
Specifications
SNMP and NM-EXT Port
  • Connector type: RJ45
  • Standard: 10/100Base-Tx
  • 10/100Mbps Auto-negotiation
Console port configuration
  • connector type: RJ45
  • complies with RS232 standard
  • 9600bps/8bit/none parity/1
Dimension
  • 6U high chassis
  • 480mm × 248mm × 267mm (W × D × H)
Weight
  • < 7Kg (chassis with two power modules)
  • < 0.5kg
Power supplyDC Power supply option
Power consumption
  • ≤ 300W (at max load)
  • ≤10W (NMS card)
Working environment
  • Temp: -5~50 Celsius
  • RH: 10~90% non-condensing
Note
  • * under developing
  • ** future plan
Compliances
Standards & protocols
  • ITU-T G.707
  • ITU-T G.781
  • ITU-T G.782
  • ITU-T G.783
  • ITU-T G.784
  • ITU-T G.803
  • ITU-T G.813
  • ITU-T G.825
  • ITU-T G.826
  • ITU-T G.831
  • ITU-T G.841
  • ITU-T G.842
  • ITU-T G.957
  • ITU-T G.958
Ordering Information
iTN2100-12-AiTN2100-12-A chassis with 15 slots and 1xFAN, without power supply
iTN2100-NMSSNMP NMS module in iTN2100, provide management and control function for the whole system

Back to Top